Supermicro 1026GT-TF Manuale Utente Scaricare il pdf (Pagina 53)

Chapter 5: Advanced Serverboard Setup

5-19

5-9 Jumper Settings

Explanation of Jumpers

To modify the operation of the

serverboard, jumpers can be used

to choose between optional settings.

Jumpers create shorts between two

pins to change the function of the con-

nector. Pin 1 is identiﬁ ed with a square

solder pad on the printed circuit board.

See the serverboard layout pages for

jumper locations.

Note: On a two-pin jumper, "Closed"

means the jumper is on both pins and

"Open" means the jumper is either on

only one pin or completely removed.

Connector

Pins

Jumper

Setting

3 2 1

CMOS Clear

JBT1 is used to clear CMOS (which will also clear any passwords). Instead of pins,

this jumper consists of contact pads to prevent accidentally clearing the contents

of CMOS.

To clear CMOS,

First power down the system and unplug the power cord(s).1.

With the power disconnected, short the CMOS pads with a metal object such 2.

as a small screwdriver.

Remove the screwdriver (or shorting device).3.

Reconnect the power cord(s) and power on the system.4.

Note: Do not use the PW_ON connector to clear CMOS.

VGA Enable/Disable

JPG1 allows you to enable or disable the

VGA port. The default position is on pins

1 and 2 to enable VGA. See the table on

the right for jumper settings.

VGA Enable/Disable

Jumper Settings

Jumper Setting Deﬁ nition

Pins 1-2 Enabled

Pins 2-3 Disabled

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

Commenti su questo manuale

Nessun commento

Supermicro 1026GT-TF Manuale Utente Pagina 53

Commenti su questo manuale

Prodotti e manuali riguardandi Server barebone Supermicro 1026GT-TF