Supermicro 1026GT-TF Manuale Utente Scaricare il pdf (Pagina 10)

1-2

SUPERSERVER 1026GT-TF/1026GT-TF-FM205 User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 1026GT-TF Series servers is the X8DTG-DF, a dual

processor serverboard based on the Intel 5520 chipset. Below are the main features

of the X8DTG-DF. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X8DTG-DF supports two Intel Xeon processor 5600/5500 series. Please refer

to the serverboard description pages on our web site for a complete listing of sup-

ported processors (www.supermicro.com).

Memory

The X8DTG-DF has 12 DIMM slots that can support up to 192 GB of registered

ECC DDR3-1333/1066/800 SDRAM or up to 48 GB of unbuffered ECC/non-ECC

DDR3-1333/1066/800 MHz SDRAM. Modules of the same size and speed are

recommended. See Chapter 5 for details.

Serial ATA

A SATA controller is integrated into the South Bridge (ICHR10) section of the chipset

to provide a six-port 3/Gbs SATA subsystem, which is RAID 0, 1, 5 and 10 sup-

ported. The SATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the SATA drives.

PCI Expansion Slots

The X8DTG-DF has two PCI-Express 2.0 x16 slots and one PCI-Express 2.0 x4

slot. The FM105 and 107 models can accommodate two standard PCI-E x8 cards

and one low-proﬁ le PCI-E x4 card in addition to the single GPU card. The 205 and

207 models can accommodate one low-proﬁ le PCI-E x4 card in addition to the two

GPU cards. The 1026GT-TF can accommodate two standard PCI-E x16 cards and

one low-proﬁ le PCI-E x4 card.

Onboard Controllers/Ports

The color-coded I/O ports include one COM port (an additional COM header is

located on the serverboard), a VGA (monitor) port, two USB 2.0 ports, PS/2 mouse

and keyboard ports and two Gb Ethernet ports.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 103 104

Nessun commento

Supermicro 1026GT-TF Manuale Utente Pagina 10