Supermicro Processor Blade SBI-7427R-S3 Manuale Utente Pagina 54

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 86
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 53
SBI-7427R-S3 Blade Module User’s Manual
4-6
Jumpers
The jumpers present on the mainboard are used by the manufacturer only; there are no
jumpers used to configure the operation of the mainboard.
CMOS Clear
JBT1 is used to clear CMOS and will also clear any passwords. JBT1 consists of two
contact pads located near the BIOS chip.
Clearing CMOS
1. First power down the blade and remove it from the enclosure.
2. Remove the blade cover to access the mainboard (see Section : Removing/
Replacing the Blade Cover on page 3-2 for further details). Short the CMOS pads
with a metal object such as a small screwdriver.
3. Replace the cover, install the blade back into the enclosure and power it on.
Vedere la pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 85 86

Commenti su questo manuale

Nessun commento