Supermicro AOC-XEH-IN2 Manuale Utente Pagina 267

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 392
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 266
7-169
Chapter 7: 1/10-Gb Ethernet Switch Firmware
IGMP Snooping Interface
Clicking the INTERFACE CONFIGURATION tab brings up the IGMP SNOOPING INTERFACE
C
ONFIGURATION page (Figure 7-149), which configures IGMP snooping interface specific
parameters. The parameters for this page are shown in Table 7-120.
Report Forward Interval
(Secs)
This parameter specifies the interval within which the next report
messages for the same multicast group will not be forwarded. The default
value is 5-seconds.
Group Query Interval
(Secs)
This parameter specifies the interval within which the switch sends a group
specific query on a port when an IGMPv2 leave message is received. The
default value is 2-seconds.
Figure 7-149. IGMP Snooping Interface Configuration Page
Table 7-120. IGMP Snooping Interface Configuration Page Parameters
Parameter Description
VLAN ID
This parameter specifies the VLAN ID for which the configuration is to be
performed.
IGMP Snooping Status
This parameter specifies the status of IGMP snooping in the Switch, which
can be enabled or disabled for a specific VLAN.
Operating Version
This parameter specifies the operating version of the IGMP snooping
switch for a specific VLAN.
Table 7-119. IGMP Snooping Timer Configuration Page Parameters (Continued)
Parameter Description
Vedere la pagina 266
1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 391 392

Commenti su questo manuale

Nessun commento